Publikationen im LiFE 2050

Publikation

  • Hübler, C.; Jan-Hendrik Piel, Chris Stetter, Cristian G. Gebhardt, Michael H. Breitner, and Raimund Rolfes (2020): Influence of structural design variations on economic viability of offshore wind turbines: An interdisciplinary analysisRenewable Energy Volume 145
  • Arash, B.; Exner, W.; Rolfes, R. (2019): Viscoelastic damage behavior of fiber reinforced nanoparticle-filled epoxy nanocomposites: Multiscale modeling and experimental validationComposites Part B: Engineering 174
  • Arash, B.; W Exner, R Rolfes (2019): : A viscoelastic damage model for nanoparticle/epoxy nanocomposites at finite strain: A multiscale approachJournal of the Mechanics and Physics of Solids 128
  • Gerendt, C.; Dean, A.; Rolfes, R. (2019): Numerical Failure Prediction of GFRP/Stainless Steel Hybrid Laminate Bolted Joints12th International Conference on Composite Science and Technology
  • Guschakowski, M.; Goldmann, A.; Sauter, W.; Dinkelacker, F.; Schröder, U. (2019): ElectroFuels and ElectroChemicals: Sustainable Conversion of Glycerol and Combustion of 2-Propanol7th International Conference: Fuel Science: From Production to Propulsion
  • Haase, F.; C. Hollemann, S. Schaefer, J. Kruegener, R. Brendel, and R. Peibst (2019): Transferring the record p-type Si POLO-IBC cell technology towards an industrial level46th IEEE Photovoltaic Specialist Conference (PVSC)
  • He, X.; A. Goldmann, B. Shu, F. Dinkelacker, R. X. Fernandes (2019): Investigation of the ignition and flame speed properties of ammonia/hydrogen mixtures7th International Conference: Fuel Science: From Production to Propulsion
  • Hildebrandt, A.; Schmidt, B.; Marx, S. (2019): Wind-wave misalignment and a combination method for direction-dependent extreme incidentsOcean Engineering 180
  • Hoffmann, A.; Kanus, M.; Overmeyer, L.; Ponick, B. (2019): Operation Analysis of an Integrated Linear Flux Modulating Motor for a Direct-driven Belt ConveyorEEMODS 2019
  • Hollemann, C.; Haase, F.; Schäfer, S.; Krügener, J.; Brendel, R.; Peibst, R. (2019): 26.1 %-efficient POLO-IBC cells: Quantification of further efficiency improvementsProgress in Photovoltaics: Research and Applications
    DOI: 10.1002/pip.3098
  • Kalla, M.; O. Korolova, A. Neufeld, L. Hofmann, B. Ponick (2019): Calculating frequency responses of synchronous machines using MIMO transfer functionsACEMP-OPTIM 2019
  • Miro, S.; Willeke, T.; Broggi, M.; Seume, J. R.; Beer, M. (2019): Reliability Analysis of an Axial Compressor Based on One-Dimensional Flow Modeling and Survival SignatureASME J. Risk Uncertainty Part B
    DOI: 10.1115/1.4043150
  • Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J.R. (2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen AeroderivatenKraftwerkstechnisches Kolloquium Dresden 2019
  • Piel, J.H.; C. Stetter, M. Heumann, M. Westbomke, and M. H. Breitner (2019): Lifetime Extension, Repowering or Decommissioning? Decision Support for Operators of Ageing Wind TurbinesJournal of Physics: Conference Series, Volume 1222, conference 1
  • Schäfer S., Haase F., Hollemann C., Hensen J., Krügener J., Brendel R., Peibst R. (2019): 26%-efficient and 2cm narrow interdigitated back contact silicon solar cells with passivated slits on two edgesSolar Energy Materials & Solar Cells, 200
  • Stetter, Chris; Heumann, Maximilian; Westbomke, Martin; Stonis, Malte; and Michael H. Breitner (2019): A Real Options Approach to Determine the Optimal Choice Between Lifetime Extension and Repowering of Wind TurbinesProceedings Operations Research 2019
  • Unger, R.; U. Braun, J. Fankhänel, B. Daum, B. Arash, R. Rolfes (2019): Molecular modelling of epoxy resin crosslinking experimentally validated by near-infrared spectroscopyComputational Materials Science 161
  • Unger, Robin; Wibke Exner, Behrouz Arash, Raimund Rolfes (2019): Nonlinear viscoelasticy of epoxy resins: Molecular simulation based prediction and experimental validationPolymer 2019
  • Urbanek, S.; Heide, D.; Bagaber, B.; Lohss, M.; Specht, B.; Paulig, X.; Mertens, A.; Ponick, B. (2019): Analysis of External Rotor Electric Drives for an All-Automatic Airborne Wind Energy SystemIEEE IEMDC 2019
  • Wietler, T. F. ; B. Min, S. Reiter, Y. Larionova, R. Reineke-Koch, F. Heinemeyer, R. Brendel, A. Feldhoff, J. Krügener, D. Tetzlaff, and R. Peibst (2019): High Temperature Annealing of ZnO:Al on Passivating POLO Junctions: Impact on Transparency, Conductivity, Junction Passivation, and Interface StabilityIEEE Journal of Photovoltaics 9 (1)
  • Alfred, I.; Nicolaus, M.; Hermsdorf, J.; Kaierle, S.; Möhwald, K.; Maier, H.-J.; Wesling, V. (2018): Advanced high pressure turbine blade repair technologies10th CIRP Conference on Photonic Technologies (LANE 2018), Procedia CIRP 74, 2018, S. 214-217
  • Bartschat, A.; Broer, C.; Coronado, D.; Fischer, K.; Kucka, J.; Mertens, A.; Meyer, R.; Moriße, M.; Pelka, K.; Tegtmeier, B.; Weber, S.; Wenske, J. (2018): Zuverlässige Leistungselektronik für WindenergieanlagenProjektbericht
    ISBN: ISBN: 978-3-8396-1326-9, 2018
  • Behrens, B.-A.; Chugreev, A.; Matthias, T.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Hassel, T. (2018): 018 Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding5th International Conference Recent Trends in Struc-tural Materials, COMAT2018
    DOI: 10.1088/1757-899X/461/1/012049
  • Bothe K., Hinken D., Min B., Schinke C. (2018): Accuracy of simplifications for spectral responsivity measurements of solar cellsIEEE Journal of Photovoltaics, IEEE, 8, 611
  • Chugreeva, A.; Mildebrath, M.; Diefenbach, J.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Hassel, T.; Overmeyer, L.; Behrens, B.-A. (2018): Manufacturing of High-Performance Bi-Metal Bevel Gears by Combined Deposition Welding and ForgingMetals 8, 2018 (11), 898
  • Denkena, B.; Bergmann, B.; Mücke, M.; Königsberg, J.; Ponick, B. (2018): Hybrid Spindle – An approach for a milling machine tool spindle with extended working range for HSC and HPC4th International Conference on System-Integrated Intelligence
  • Denkena, B.; Breidenstein, B.; Grove, T.; Prasanthan, V.; Overmeyer, L.; Nothdurft, S.; Kaierle, S.; Wallaschek, J.; Twiefel, J.; Ohrdes, H.; Maier, H. J.; Hassel, T.; Mildebrath, M. (2018): Surface integrity of turned laser-welded hybrid shaftsProd. Eng. Res. Devel
    DOI: 10.1007/s11740-018-0862-8
  • Denkena, B.; F. Dinkelacker, A. Rienäcker, C. Schmidt, H. Pasligh, Ö. Özdemir (2018): Spanende Mikrostrukturierung von Dieselmotor-Zylinderlaufbuchsen zur ReibungsminderungTagungsbeitrag Gesellschaft für Tribologie, Göttingen 2018
  • Gerendt, C.; Englisch, N.; Jansen, E.; Rolfes, R. (2018): Energy Based Fatigue Damage Analysis of CFRP-GFRP Hybrid LaminatesProceedings of the 7th International Conference on Fatigue of Composites
  • Goldmann, A.; Sauter, W.; Oettinger, M.; Kluge, T.; Schröder, U.; Seume, J.R.; Friedrichs, J.; Dinkelacker, F. (2018): A Study on Electrofuels in AviationEnergies 2018, Vol. 11(2), 392
    DOI: 10.3390/en11020392
  • Günzel, M.; Scharf, R. (2018): Thermodynamic Potential Analysis of Waste Heat Utilization of Hot Gas with an Organic-Rankine-Cycle and Ethanol-Water-Mixtures as Medium5th International Conference "Low Temperature and Waste Heat Use in Communal and Industrial Energy Supply Systems"
  • Haase F., Hollemann C., Schäfer S., Merkle A., Rienäcker M., Krügener J., Brendel R., Peibst R. (2018): Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cellsSolar Energy Materials & Solar Cells, 186
  • Haase F., Schäfer S., Klamt C., Kiefer F., Krügener J., Brendel R., Peibst R. (2018): Perimeter recombination in 25%-efficient IBC solar cells with passivating POLO contacts for both polaritiesIEEE Journal of Photovoltaics, 8, 23,
  • Hartmann, U.; Von der Haar, H.; Dinkelacker, F.; Seume, J.R. (2018): Experimental Defect Detection in a Swirl-Burner Array Through Exhaust Jet Analysis2018 AIAA Aerospace Sciences Meeting, AIAA SciTech Forum, 8-12 January 2018, Kissimmee, Florida, USA
    DOI: 10.2514/6.2018-0303
  • Henke, M.; Narjes, G.; Hoffmann, J.; Wohlers, C.; Urbanek, S.; Heister, C.; Steinbrink, J.; Canders, W.-R.; Ponick, B. (2018): Challenges and Opportunities of Very Light High-Performance Electric Drives for AviationMDPI Energies
  • Herzhoff, A.; Scharf, R. (2018): Internationale Kenngrößen zur Bemessung der Rolle des konventionellen Kraftwerksparks in der EnergiewendeKraftwerkstechnik 2018
    ISBN: 978-3-934409-81-1
  • Hofmann L.; Mertens A.; Ponick B. Seume J.; Mathies W. (2018): AMSES – Aggregierte Modelle für die Simulation von dynamischen Vorgängen in elektromechanischen Energiesystemen – AbschlussberichtTEWISS Verlag
    ISBN: 978-3-95900-212-7
  • Kauth, F.; Narjes, G.; Müller, J.-K.; Mertens, A.; Ponick, B.; Seume, J.R. (2018): Electrically driven, Compact, Transonic Mixed-Flow Compressor for Active High-Lift Systems in Future AircraftProceedings of Global Power and Propulsion Forum (GPPF) 2018, Global Power and Propulsion Society (GPPS)
    DOI: 10.5281/zenodo.1342725
  • Königsberg, J.; Reiners, J.; Böhse, F.; Bergmann, B.; Denkena, B.; Ponick, B. (2018): Stator-Integrated Damping of Chatter Vibrations for Induction Motor SpindlesInternational Conference on Electrical Machines and Systems (ICEMS 2018)
  • Königsberg, J.; Reiners, J.; Ponick, B.; Denkena, B.; Bergmann, B. (2018): Highly Dynamic Spindle Integrated Magnet Actuators for Chatter ReductionInternational Journal of Automation Technology, Vol. 12, No. 5, pp. 669-677, 2018
  • Meinzer, C. E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J. R.: (2018): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine ShaftsProceedings of the Global Power & Propulsion Society Zurich Forum 2018, GPPS-2018-0016. Zurich, Switzerland. 10-12 January 2018
  • Mildebrath, M.; Maier, H. J.; Hassel, T.; Coors, T.; Pape, F.; Poll, G.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Overmayer, L. (2018): 018 Herstellungsprozess und Wälzfestigkeit von hybriden HochleistungsbauteilenKonstruktion 70, 2018 (9), 84-89
  • Min, B.; Vogt, R.; Wietler, T.; R. Reineke-Koch, B. Wolpensinger, E. Köhnen, D. Tetzlaff, C. Schinke, R. Brendel, and R. Peibst (2018): Increasing the photo-generated current in solar cells with passivating contacts by reducing the poly-Si deposition temperatureAIP Conference Proceedings 1999 (1), 040015, Lausanne, Switzerland, (2018), (SILICONPV 2018, THE 8TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS)
  • Misir, O.; Raziee, S. M.; Spyridonidis, I.; Brand, J.; Bothmann, F.; Dreyer, M.; Ponick, B. (2018): Performance Analysis of Synchronous Machines after Disconnecting Stator CoilsIEEE Transactions on Industry Applications, Vol. 54, No. 5, pp. 4315-4323
  • Mueller, J.-K.; Bensmann, A.; Bensmann, B.; Fischer, T.; Kadyk, T.; Narjes, G.; Kauth, F.; Ponick, B.; Seume, J. R.; Krewer, U.; Hanke-Rauschenbach, R.; Mertens, A. (2018): Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift SystemsMDPI Energies 11(1), 179
    DOI: 10.3390/en11010179
  • Narjes, G.; Kauth, F.; Müller, J.; Mertens, A.; Seume, J.R.; Ponick, B. (2018): High-Speed Permanent Magnet Synchronous Machine for Short-Term Operation in an Electrically Powered High-Lift SystemAIAA/IEEE Electric Aircraft Technologies Symposium
    DOI: 10.2514/6.2018-4989
  • Nicolaus, M.; Rottwinkel, B.; Alfred, I.; Möhwald, K.; Nölke, C.; Kaierle, S.; Maier, H. J.; Wesling, V. (2018): Future regeneration processes for high-pressure turbine bladesCEAS Aeronaut J 9, 2018 (1), 85-92
  • Nothdurft, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L.; Kaierle, S. (2018): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloyInternational Congress on Applications of Lasers & Electro-Optics, ICALEO 2018. Orlando, Fl. USA
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L. (2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructureJournal of Laser Applications 30, 2018 (3), 32417
  • Oneschkow, N.; von der Haar, C.; Hümme, J.; Otto, C.; Lohaus, L.; Marx, S. (2018): Ermüdung von druckschwellbeanspruchtem Beton – Materialverhalten, Modellbildung, BemessungBetonkalender 2018 (Hrsg.: Bergmeister, K.; Fingerloos, F.; Wörner, J.-D.)
    ISBN: 978-3-433-03160-5
  • Peibst R., Larionova Y., Reiter S., Wietler T.F., Orlowski N., Schäfer S., Min B., Stratmann M., Tetzlaff D., Krügener J., Höhne U., Kähler J.D., Mehlich H., Frigge S., Brendel R. (2018): Building blocks for industrial, screen-printed double-side contacted POLO cells with highly transparent ZnO:Al layersIEEE Journal of Photovoltaics, IEEE, 8, 719
  • Peibst R., Rienäcker M., Min B., Klamt C., Niepelt R., Wietler T.F., Dullweber T., Sauter E., Hübner J., Oestreich M., Brendel R. (2018): From PERC to Tandem: POLO- and p+/n+ Poly-Si Tunneling Junction as Interface Between Bottom and Top CellIEEE Journal of Photovoltaics
    DOI: 10.1109/JPHOTOV.2018.2876999
  • Peibst, R.; Folchert, N.; Haase, F.; Klamt, C.; Larionova, Y.; Krügener, J.; Merkle, A.; Min, B.; Rienaecker, M.; Römer, U.; Schäfer, S.; Tetzlaff, D.; Wietler, T.; and Brendel, R. (2018): 018 In-Depth Study of poly-Si / Oxide / c -Si Junctions and p+ poly-Si / n+ poly-Si Tunneling Junctions f or Applications in Si Single Junction and Si- Based Tandem Cells2018 MRS Fall Meeting & Exhibit
  • Piel, C. Stetter, C. G. Gebhardt, M. H. Breitner, R. Rolfes (2018): Effects of the Support Structure Design on the Economic Viability of Offshore Wind Projects: an Interdisciplinary AnalysisOffshore Wind R&D Conference Bremerhaven
  • Piel, J.-H.; Westbomke, M. (2018): What to do with the aging German wind fleet?WindTECH International, vol. 14 (2018), no. 7, pp. 7-9
  • Rolfes, R.; Schaumann, P.; Schürmann, K.; Raba, A.; Kelma, S.; Dubois, J.; Eichstädt, R.; Stang, A.; Henneberg, J. et al. (2018): Lebensdauer-Forschung an den OWEA-Tragstrukturen im Offshore-Testfeld alpha ventus - Validierte Methoden und Strukturmodelle für ein integrales und wirtschaftliches Design von OWEA-TragstrukturenGIGAWIND life - Schlussbericht, Online-Veröffentlichung der TIB/UB Hannover
  • Schaumann, P.; Henneberg, J.; Raba, A.; Lohaus, L.; Cotardo, D (2018): Überwiegend axial wechselbeanspruchte Grout-Verbindungen in Tragstrukturen von Offshore-WindenergieanlagenGROWup - Schlussbericht, Online-Veröffentlichung der TIB/UB Hannover
    DOI: 10.2314/GBV:1023726807
  • Schneider, S.; Hümme, J.; Marx, S.; Lohaus, L. (2018): Untersuchungen zum Einfluss der Probekörpergröße auf den Ermüdungswiderstand von hochfestem BetonBeton- und Stahlbetonbau 113, Heft 1, S. 58-67
    DOI: 10.1002/best.201700051
  • Sewdien, V. N.; van der Meijden, M.; Breithaupt, T.; Hofmann, L.; Herwig, D.; Mertens, A.; Tuinema, B.; Rueda Torres, J. (2018): 01 Effects of Increasing Power Electronics on System Stability: Results from MIGRATE Questionnaire2018 IEEE PES ICUE, Phuket, Thailand
  • Tasche, F.; H. Pasligh, C. Schmidt, B. Denkena, F. Dinkelacker (2018): : Tribological Influence of Machined Micro Dimples in Cylinder Liners on Heavy Duty Diesel Engines21st International Colloquium Tribology, Esslingen 2018
  • Urbanek, S.; Ponick, B.; Taube, A.; Hoyer, K.-P.; Schaper, M.; Lammers, S.; Lieneke, T.; Zimmer, D. (2018): Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous MachineIEEE Transportation and Electrification Conference and Expo (ITEC 2018)
  • Velasquez, J., Castro, F., Babazadeh, D., Lehnhoff, S., Kumm, T., Heuberger, D., Treydel, R., Lueken, T., Garske, S., Hofmann, L. (2018): Co-simulation Set-up for Testing Controller Interactions in Distribution NetworksWorkshop on Modeling and Simulation of Cyber-Physical Energy Systems, Porto, Portugal
  • Walter, Anna; Wiehe, Julia; Schlömer, Gerrit; Hashemifarzad, Ali; Wenzel, Tim; Albert, Ingrid; Hofmann, Lutz; zum Hingst, Jens & Haaren, Christina v. (2018): Naturverträgliche Energieversorgung aus 100 % erneuerbaren Energien 2050Bonn, BfN-Skripten 501, 160 S.
    DOI: 10.19217/skr501
  • Walter, Anna; Wiehe, Julia; Schlömer, Gerrit; Hashemifarzad, Ali; Wenzel, Tim; Albert, Ingrid; Hofmann, Lutz; zum Hingst, Jens & Haaren, Christina v. (2018): Naturverträgliche Energieversorgung aus 100 % erneuerbaren Energien 2050 (EE100) Anhang zum BfN-Skript 501
    DOI: 10.13140/RG.2.2.25165.28647
  • Westbomke, M.; Piel, J.-H. (2018): Eine Rückbauwelle steht bevorEnergie & Management Stark im Wind, Energie & Management Verlagsgesellschaft mbh Jg. (2018) S. 21 ff.
  • Westbomke, M.; Piel, J.-H.; Breitner, M. H.; Nyhuis, P.; Stonis, M. (2018): An Optimization Model to Develop Efficient Dismantling Networks for Wind TurbinesKliewer, N.; Ehmke, J.; Borndörfer, R. (eds.): Operations Research Proceedings 2017, German Operations Research Society (GOR), Springer International, pp. 239-244
  • Wietler T. F., Min B., Reiter S., Larionova Y., Reineke-Koch R., Heinemeyer F., Brendel R., Feldhoff A., Krügener J., Tetzlaff D., Peibst R. (2018): High temperature annealing of ZnO:Al on passivating POLO junctions: Impact on transparency, conductivity, junction passivation and interface stabilityIEEE Journal of Photovoltaics, IEEE, 9, 89
  • Wohlers, C.; Juris, P., Kabelac, S.; Ponick, B. (2018): Design and Direct Liquid Cooling of Tooth-Coil Windings, Electrical Engineering, Volume 100, Issue 4, pp. 2299–2308
  • A. Glišić, P. Schaumann, M. Broggi, M. Beer (2017): Sensitivity Analysis of Material and Load Parameters to Fatigue Stresses of an Offshore Wind Turbine Monopile SubstructureProcedia Engineering, Vol. 199, S. 1228-1233
    DOI: 10.1016/j.proeng.2017.09.255
  • Beer, S. & Appelrath, H.-J. (2017): A Formal Model for Agent-Based Coalition Formation in Electricity Markets4th IEEE PES Innovative Smart Grid Technologies Europe (ISGT Europe)
  • Brandt, S.; Broggi, M.; Häfele, J.; Gebhardt, C. G.; Rolfes, R. & Beer, M. (2017): Meta-models for fatigue damage estimation of offshore wind turbines jacket substructuresProcedia Engineering, Band 199, Seite(n): 1158-1163
    DOI: 10.1016/j.proeng.2017.09.292
  • C. Gerendt, E. Jansen, R. Rolfes (2017): A Fatigue Damage Model for Fiber Metal Laminates Including Fiber/Matrix DegradationProceedings of the 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites
  • C. Gerendt, E. Jansen, R. Rolfes (2017): A Fatigue Damage Model for Fiber Metal Laminates Including Fiber/Matrix DegradationProceedings of the 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites
  • Denkena, B.; Grove, T.; Mücke, A.; Langen, D.; Nespor, D. & Hassel, T. (2017): Residual stress formation after re-contouring of micro-plasma welded Ti−6Al−4 V parts by means of ball end millingMat.-wiss. u. Werkstofftech. 48 (11), Seite(n) 1034-1039
    DOI: 10.1002/mawe.201600743X
  • Dullweber, T.; Schulte-Huxel, H.; Kranz, C.; Blankemeyer, S.; Baumann, U.; Witteck, R.; Peibst, R.; Köntges, M.; Brendel, R & Yao, Y. (2017): Bifacial PERC+ Solar Cells and Modules: An Overview InproceedingsWIP (Hrsg.), Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, 649-656 Amsterdam, The Netherlands
    ISBN: 3-936338-47-7
  • Glišić, A.; Schaumann, P.; Broggi, M. & Beer, M. (2017): Sensitivity Analysis of Material and Load Parameters to Fatigue Stresses of an Offshore Wind Turbine Monopile SubstructureProcedia Engineering, Vol. 199, S. 1228-1233
    DOI: 10.1016/j.proeng.2017.09.255
  • Haase, F.; Kiefer, F.; Schäfer, S.; Kruse, C.; Krügener, J.; Brendel, R. & Peibst, R. (2017): Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polaritiesJapanese Journal of Applied Physics 56
  • Haase, F.; Schäfer, S.; Kiefer, F.; Krügener, J.; Brendel, R. & Peibst, R. (2017): Perimeter recombination of 25 %-efficient IBC solar cells with passivating POLO contacts for both polarities44th Photovoltaic Specialists Conference (44th IEEE PVSC). Washington, D.C., USA. 22.-30.06.2017
  • Hauptmann, T.; Aschenbruck, J. & Seume, J. R. (2017): Forced Response Excitation due to Stagger Angle Variation in a Multi-Stage Axial TurbineInternational Journal of Gas Turbine, Propulsion and Power Systems Volume 9 (Number 3), 1—11
  • Hübler, C.; Piel, J.-H.; Breitner, M.H. & Rolfes, R. (2017): How Do Structural Designs Affect the Economic Viability of Offshore Wind Turbines? An Interdisciplinary Simulation ApproachInternational Conference on Operations Research. Berlin, 2017
  • J. Krügener, F. Haase, M. Rienäcker, R. Brendel, R. Peibst, H. J. Osten (2017): Improvement of the SRH Bulk Lifetime upon Formation of n-Type POLO Junctions for 25% Efficient Si Solar Cells7th International Conference on Silicon Photovoltaics
  • J. Krügener, F. Haase, M. Rienäcker, R. Brendel, R. Peibst, H. J. Osten (2017): Improvement of the SRH Bulk Lifetime upon Formation of n-Type POLO Junctions for 25% Efficient Si Solar Cells7th International Conference on Silicon Photovoltaics (7th SiliconPV), Freiburg, Germany, 03. - 05.04.2017
  • J. Krügener, F. Haase, M. Rienäcker, R. Brendel, R. Peibst, H.-J. Osten (2017): Improvement of the SRH Bulk Lifetime upon Formation of n-Type POLO Junctions for 25% Efficient Si Solar CellsJournal, Solar Energy Materials & Solar Cells 173 (2017) 85
  • Keller, C.; Kellersmann, A.; Friedrichs, J. & Seume, J. R. (2017): Influence of Geometric Imperfections on Aerodynamic and Aeroelastic Behavior of a Compressor BliskProceedings of ASME Turbo Expo 2017. Charlotte, USA, 2017
  • Korolova, O.; Popp, M; Mathis, W. & Ponick B. (2017): Performance of Runge-Kutta family numerical solvers for calculation of transient processes in AC machines20th International Conference on Electrical Machines and Systems (ICEMS)
  • Krügener, J.; Haase, F.; Rienäcker, M.; Brendel, R.; Peibst, R. & Osten, H. J. (2017): Improvement of the SRH Bulk Lifetime upon Formation of n-Type POLO Junctions for 25% Efficient Si Solar CellsLNQE Nanoday 2017. Hannover, Germany, 28.09.2017
  • Kruse, C. N.; Wolf, M.; Schinke, C.; Hinken, D.; Brendel, R. & Bothe, K. (2017): Impact of contacting geometries on measured fill factorsEnergy Procedia 124 (Supplement C), 84-90
  • Laine, H. S.; Vähänissi, V.; Liu, Z.; Magaña, E.; Krügener, J.; Morishige, A. E.; Salo, K.; Lai, B.; Savin, H. & Fenning, D. P. (2017): Unified model for iron gettering in boron- and phosphorus-implanted siliconGettering and Defect Engineering in Semiconductor Technology 2017 (GADEST2017). Lopota Resort, Georgia. 01.-06.10.2017
  • Laine, H. S.; Vähänissi, V.; Liu, Z.; Magana, E.; Morishige, A. E.; Krügener, J.; Salo, K.; Lai, B.; Salvin, H. & Fenning, D. P. (2017): Toward Effective Gettering in Boron-Implanted Silicon Solar Cells44th Photovoltaic Specialists Conference (44th IEEE PVSC). Washington, D.C., USA, 22.-30.06.2017
  • Larionova, Y.; Turcu, M.; Reiter, S.; Brendel, R.; Tetzlaff, D.; Krügener, J.; Wietler, T.; Höhne, U.; Kähler, J.-D. & Peibst, R. (2017): On the recombination behavior of p+-type polysilicon on oxide junctions deposited by different methods on textured and planar surfacesJournal, Physica Status Solidi A: Applications and Materials Science
  • M. John, A. Mertens, M. Popp und W. Mathis (2017): Model order reduction for a full scale grid converter for grid simulations19th European Conference on Power Electronics and Applications. (EPE’17 ECCE Europe)
  • Meinzer, C.E.; Keller, C.; Korolova, O.; Ponick, B.; Seume, J.R. (2017): Influence of Aerodynamic Damping on Torsional Vibrations of Turbine ShaftsProceedings of the Global Power & Propulsion Society Zurich Forum 2018, GPPS-2018-0016, 10-12 January 2018, Zurich, Switzerland
  • Min, B.; Krügener, J.; Müller, M.; Bothe, K. & Brendel, R. (2017): Fundamental Consideration about Junction Formation Strategies for Phosphorus-doped Emitters with J0e < 10 fA/cm²Journal, Energy Procedia 124, S. 126.
  • Min, B.; Kruse, C.; Schinke, C.; Wolf, M.; Müller, M.; Sträter, H.; Wagner, M.; Bothe, K. & Brendel, R. (2017): Identifying the location of recombination from voltage-dependent quantum efficiency measurementsEnergy Procedia 124 (Supplement C), 120-125
  • Min, B.; Müller, M.; Wagner, H.; Fischer, G.; Brendel, R.; Altermatt, P. P. & Neuhaus, H. (2017): A Roadmap Toward 24 % Efficient PERC Solar Cells in Industrial Mass Production IEEE Journal of Photovoltaics 7 (6), 1541-1550
  • Morisse, M.; Bartschat, A.; Wenske, J.; Mertens, A. (2017): Impact of Individual Pitch Control on Pitch Actuators in Megawatt Wind TurbinesEuropean Conference on Power Electronics and Applications (EPE’2017 ECCE-Europe), Warsaw, Poland, 11.-14.09.2017
  • Nabavi, S. R.; Haase, F.; Jansen, E. & Rolfes, R. (2017): Monte-Carlo simulation of the cofiring process in polycrystalline silicon solar cells: Effects of material heterogeneity and thickness uncertaintiesSolar Energy Materials and Solar Cells 170, S. 263-277
  • Peibst, R.; Larionova, Y.; Reiter, S.; Orlowski, N.; Schäfer, S.; Turcu, M.; Min, B.; Brendel, R.; Tetzlaff, D.; Krügener, J.; Wietler, T.; Höhne, U.; Kähler, J-D.; Mehlich, H. & Frigge, S. (2017): Industrial, Screen-Printed Double-Side Contacted Polo Cells InproceedingsWIP (Hrsg.). Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, 451-454. Amsterdam, Netherlands.
    ISBN: 3-936338-47-7
  • Peibst, R.; Reiter, S.; Larionova, Y.; Koch, R.-R.; Brendel, R.; Tetzlaff, D.; Krügener, J.; Wietler, T.; Höhne, U.; Kähler, J.-D. & Mehlich, H. (2017): Building blocks for industrial, screen-printed two sides-contacted POLO cells with highly transparent ZnO: Al layers33rd European PV Solar Energy Conference and Exhibition (33rd EU PVSEC). Amsterdam, Netherlands. 25.-29.09.2017
  • Popp, M.; Mathis, W.; John, M.; Korolova, O.; Mertens, A. & und Ponick, B. (2017): A Modified CCM Approach for Simulating Hierarchical Interconnected Dynamical SystemsInternational Symposium on Circuits and Systems, ISCAS. Baltimore, USA. 2017. S. 1262–1265
  • Popp, M.; Mathis, W.; Korolova, O. & und Ponick, B. (2017): Modeling and Simulation of Electrical Machines Within a CCM FrameworkInternational Electric Machines Drives Conference, IEMDC. Miami, USA. 2017. S. 1–8
  • Rienäcker, M.; Bossmeyer, M.; Merkle, A.; Römer, U.; Haase, F.; Kügener, J.; Brendel, R. & Peibst, R. (2017): Junction Resistivity of Carrier-Selective Polysilicon on Oxide junctions and Its Impact on Solar Cell PerformanceIEEE Journal of Photovoltaics 7 (2017) 11
  • Rienäcker, M.; Schnabel, M.; Warren, E.; Merkle, A.; Schulte-Huxel, H.; Klein, T. R.; van Hest, M. F. A. M.; Steiner, M. A.; Geisz, J.; Kajari-Schröder, S.; Niepelt, R.; Schmidt, J.; Brendel, R.; Stradins, P.; Tamboli, A. & Peibst, R. (2017): Mechanically Stacked Dual-Junction and Triple-Junction III-V/Si-IBC Cells with Efficiencies of 31.5 % and 35.4 %WIP (Hrsg.): Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, 1-4. Amsterdam, Netherlands.
  • Schäfer, S.; Haase, F.; Klamt, C.; Kruse, C.; Kiefer, F.; Krügener, J.; Brendel, R. & Peibst, R. (2017): IBC solar cells with passivating POLO contacts for both polarities – revisiting optical losses8th workshop on back contact solar cell and module technology. Freiburg, Germany. 21. - 22.11.2017
  • Schäfer, S.; Haase, F.; Peibst, R. & Brendel, R. (2017): Silicon nanopowder as diffuse rear reflector for silicon solar cellsJournal of Applied Physics 122 (2017) 053102
  • Schlobohm, J.; Bruchwald, O.; Frackowiak, W.; Li, Y.; Kästner, M.; Pösch, A. et al. (2017): Advanced Characterization Techniques for Turbine Blade Wear and DamageProcedia CIRP, Bd. 59: ELSEVIER, S. 83–88, 2017
  • Schwerdt, L.; Berger, R.; Keller, C.; Seume, J.; Rolfes, R.; Panning-von Scheidt, L. & Wallaschek, J. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and MistuningGPPS (Hg.): Proceedings of Global Power and Propulsion Society Conference. Shanghai
  • Stümpel, M.; Marx, S.; Schaumann, P.; Seidl, G. & Göhlmann, J. (2017): An Innovative Hybrid Substructure Made of High-Strength Concrete and Ductile Cast Iron for Offshore Wind TurbinesProceedings of the 13th German Wind Energy Conference DEWEK 2017. Bremen, Germany. 17.-18. Oktober 2017
  • Stümpel, M.; Marx, S.; Schaumann, P.; Seidl, G. & Göhlmann, J. (2017): An Innovative Hybrid Substructure for Offshore Wind TurbinesProceedings of the Twenty-seventh (2017) International Ocean and Polar Engineering Conference. San Francisco, CA, USA. 25.-30. Juni 2017. S. 1003-1010
    ISBN: 978-1-880653-97-5
  • Tappe, S.; Yu, D.; Kotlarski, J. & Ortmaier, T. (2017): Model Reduction Methods for optimal Follow-the-Leader Movements of Binary Actuated, Hyper-Redundant Robots7th IFToMM International Workshop on Computational Kinematics (CK2017). Poitiers, France. May, 2017
  • Tetzlaff, D.; Dzinnik, M.; Krügener, J.; Larionova, Y.; Reiter, S.; Turcu, M.; Peibst, R.; Höhne, U.; Kähler, J.-D. & Wietler, T. F. (2017): Introducing Pinhole Magnification by Selective Etching: Application to Poly-Si on Ultra-Thin Silicon Oxide FilmsJournal, Energy Procedia 124 (2017) 435
  • Tetzlaff, D.; Dzinnik, M.; Krügener, J.; Larionova, Y.; Reiter, S.; Turcu, M.; Peibst, R.; Höhne, U.; Kähler, J.-D. & Wietler, T. (2017): Tetramethylammoniumhydroxide - Pinhole Magnification by Selective EtchingLNQE Nanoday 2017. Hannover, Germany. 28.09.2017
  • Tetzlaff, D.; Krügener, J.; Larionova, Y.; Reiter, S.; Turcu, M.; Haase, F.; Brendel, R.; Peibst, R.; Höhne, U.; Kähler, J.-D. & Wietler T. F. (2017): A Simple Method for Pinhole Detection in Carrier Selective POLO-Junctions for High Efficiency Silicon Solar CellsJournal, Solar Energy Materials & Solar Cells 173 (2017) 106
  • Tetzlaff, D.; Krügener, J.; Larionova, Y.; Reiter, S.; Turcu, M.; Haase, F.; Brendel, R.; Peibst, R.; Höhne, U.; Kähler, J.-D. & Wietler, T. (2017): Junction Unchained - Pinhole Detection in Carrier-Selective POLO-JunctionsLNQE Nanoday 2017. Hannover, Germany, 28.09.2017
  • Vogt, M.R.; Holst, H.; Schulte-Huxel, H.; Blankemeyer, S.; Witteck, R.; Bujard, P.; Kues, J-B.; Schinke, C.; Bothe, K.; Köntges, M.& Brendel, R. (2017): PV module current gains due to structured backsheetsEnergy Procedia 124 (Supplement C), 495-503 (2017)
  • Westbomke, M.; Piel, J.-H.; Stonis, M.; Breitner, M.H. & Nyhuis, P. (2017): An Optimization Model to Develop Efficient Dismantling Networks for Wind TurbinesInternational Conference on Operations Research. Berlin, Deutschland
  • Wietler, T.F.; Tetzlaff, D.; Krügener, J.; Rienäcker, M.; Haase, F.; Larionova, Y.; Brendel, R. & Peibst, R. (2017): Pinhole Density and Contact Resistivity of Carrier Selective Junctions with Polycrystalline Silicon on OxideJournal, Applied Physics Letters 110 (2017) 253902
  • Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J. & Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family InteractionProceedings of 12th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics (ETC12). Stockholm, Sweden. April 3-7
  • Bartschat, A., Morisse, M., Mertens, A., Wenske, J. (2016): Analysis of Dynamic Interactions between Different Drivetrain Components with a Detailed Wind Turbine ModelJournal of Physics: Conference Series, 753 (8)
  • Bartschat, A.; Morisse, M.; Mertens, A.; Wenske, J. (2016): Analysis of Dynamic Interactions between Different Drivetrain Components with a Detailed Wind Turbine ModelThe Science of Making Torque from Wind (TORQUE 2016) München, 05.-07. October 2016
  • Böß, V.; Grove, T.; Denkena, B.; Mücke, A. & Nespor, D. (2016): Prediction of the Principal Stress Direction for 5-axis Ball End MillingProcedia CIRP 45, S. 291–294  | Datei |
    DOI: 10.1016/j.procir.2016.02.145
  • Brendel, R. & Niepelt, R. (2016): Abschlussbericht zum Auftrag Zusatzgutachten „Zeitlich höher aufgelöste Szenarien“ zum Hauptgutachten „Szenarien zur Energieversorgung in Niedersachsen im Jahr 2050“ der CUTEC GmbH an die ISFH GmbH„Szenarien zur Energieversorgung in Niedersachsen im Jahr 2050 - Zusatzgutachten zeitlich höher aufgelöste Szenarien“ (Niedersächsisches Ministerium für Umwelt, Energie und Klimaschutz, Hannover), pp. 60 - 119.
  • Dörbaum, M.; Winkel, T.; Tappe, S.; Kotlarski, J.; Ortmaier, T. & Ponick, B. (2016): Torque Measurements on an Electromagnetic Tilting ActuatorProceedings of the 15th International Conference on New Actuators. Bremen, Germany. June, 2016
  • Dubois, J., Thieken, K., Terceros, M., Schaumann, P., Achmus, M. (2016): Advanced Incorporation of Soil-Structure Interaction into Integrated Load Simulation26th Int. Ocean and Polar Engineering Conference (ISOPE)
  • F. Kiefer, J. Krügener, F. Heinemeyer, H. J. Osten, R. Brendel, R. Peibst (2016): Structural investigation of printed Ag/Al contacts on silicon and numerical modeling of their contact recombinationIEEE Journal of Photovoltaics, vol. 6, 2016, p. 1175
    DOI: 10.1109/JPHOTOV.2016.2591318
  • F. Kiefer, J. Krügener, F. Heinemeyer, M. Jestremski, H. J. Osten, R. Brendel, R. Peibst (2016): Bifacial fully screen-printed n-PERT solar cells with BF2 and B implanted emittersSolar Energy Materials and Solar Cells, vol. 157, 2016, p. 326
    DOI: 10.1016/j.solmat.2016.05.028
  • F. Müller-Deile, H. Heseding, B. Ponick, A. Mertens (2016): Bezahlbare elektrische Reichweite durch ModularitätDeutsches Ingenieurblatt 5-2016, Mai 2016, S. 54-60
  • Gilge P. & Mulleners, K. (2016): Resulting Aerodynamic Losses of Combinations of Localized Roughness Patches on Turbine BladesAIAA Journal 54 (8), S. 2552–2555 
    DOI: 10.2514/1.J054602
  • H. Schulte-Huxel, F. Kiefer, S. Blankemeyer, R. Witteck, M. Vogt, M. Köntges, and Rolf Brendel, J. Krügener, R. Peibst (2016): Flip-flop cell interconnection enabled by an extremely high bifaciality of screen-printed ion-implanted n-PERT Si solar cellsProceedings of the 32nd European Photovoltaic Solar Energy Conference, WIP, Munich, 2016, p. 407
  • Haase, F.; Kiefer, F.; Krügener, J.; Brendel, R. & Peibst, R. (2016): IBC solar cells with polycrystalline on oxide (POLO) passivating contacts for both polarities26th International Photovoltaic Science and Engineering Conference (PVSEC-26), Singapore.
  • Hartmann U. & Seume, J. R.   (2016): Combining ART and FBP for improved fidelity of tomographic BOSMeas. Sci. Technol. 27 (9), S. 097001 
    DOI: 10.1088/0957-0233/27/9/097001
  • Hartmann, Ulrich; Hennecke, Christoph; Dinkelacker, Friedrich; Seume, Joerg R. (2016): Automatic Detection of Defects in a Swirl Burner Array Through an Exhaust Jet Pattern Analysisvolume 139, number 3, Journal Eng. Gas Turbines Power
    DOI: 10.1115/1.4034449
  • Hartmann, Ulrich; Hennecke, Christoph; Dinkelacker, Friedrich; Seume, Jörg (2016): Automatic Detection of Defects in an Annular Swirl Burner Array Through an Exhaust Jet Pattern AnalysisProceedings of the ASME Turbo Expo 2016
  • Heseding, J., Mueller-Deile, F., Mertens, A. (2016): Estimation of losses in permanent magnet synchronous machines caused by inverter voltage harmonics in driving cycle operation18th European Conference on Power Electronics and Applications, EPE 2016 ECCE Europe
  • Hohl, A. & Wallaschek, J.   (2016): A Method to Reduce the Energy Localization in Mistuned Bladed Disks by Application-Specific Blade Pattern ArrangementJ. Eng. Gas Turbines Power 138 (9), S. 092502 
    DOI: 10.1115/1.4032739
  • Hümme, J.; von der Haar, C.; Lohaus, L. & Marx, S. (2016): Fatigue behaviour of a normal-strength concrete – number of cycles to failure and strain developmentStructural Concrete 17, Heft 4, Seiten 637-645.
    DOI: 10.1002/suco.201500139
  • J. Krügener, F. Kiefer, R. Peibst, H. J. Osten (2016): Comparison of experimental emitter saturation current densities and simulated defect densities of boron-implanted emittersProceedings of the 21st International Conference on Ion Implantation Technology (IIT), Tainan, Taiwan 2016
    ISBN: 9781479952137
  • Jan Häfele, Clemens Hübler, Cristian Guillermo Gebhardt, Raimund Rolfes (2016): An improved two-step soil-structure interaction modeling method for dynamical analyses of offshore wind turbines: Applied Ocean Research, Band 55, Seiten 141-150
    DOI: 10.1016/j.apor.2015.12.001
  • Kähler, J.-D.; Höhne, U.; Haase, J.J.; Tetzlaff, D.; Krügener, J.; Wietler, T.; Larionova, Y.; Reiter, S.; Turcu, M.; Brendel, R. & Peibst, R. (2016): Low pressure chemical vapour deposition for in situ doped n+ POLO junctions in industrial silicon solar cells26th International Photovoltaic Science and Engineering Conference (PVSEC-26), Singapore, 24. - 28.10.2016.
  • Kauth, F.; Narjes, G.; Müller, J.; Mertens, A.; Ponick, B.; Seume, J. R. (2016): Highly Integrated Electrically Driven active High-Lift Compressor Systems for Future Civil AircraftGreener Aviation 2016
  • Krügener, J.; Kiefer, F.; Rienäcker, M.; Haase, F.; Peibst, R. & Osten, H.J. (2016): Ion implantation for photovoltaic applications: Review and outlook for n-type silicon solar cells21st International Conference on Ion Implantation Technology (IIT), Tainan, Taiwan (26. - 30.09.2016)
  • Krügener, J.; Larionova, Y.; Wolpensinger, B.; Tetzlaff, D.; Reiter, S.; Turcu, M.; Peibst, R.; Kähler, J.-D. & Wietler, T. (2016): Dopant diffusion from p+-poly-Si into c-Si during thermal annealing43rd Photovoltaic Specialists Conference (43rd IEEE PVSC), Portland, OR, USA, 05.-10.06.2016.
  • Krügener, J.; Tetzlaff, D.; Larionova, Y.; Barnscheidt, Y.; Reiter, S.; Turcu, M.; Peibst, R.; Kähler, J.-D. & Wietler, T. (2016): Electrical deactivation of boron in p+-poly/SiOx/crystalline silicon passivating contacts for silicon solar cells21st International Conference on Ion Implantation Technology (IIT), Tainan, Taiwan (26. - 30.09.2016).
  • Larionova, Y.; Peibst, R.; Turcu, M.; Reiter, S.; Brendel, R.; Tetzlaff, D.; Krügener, J.; Wietler, T.; Höhne, U. & Kähler, J.-D. (2016): Optimization of p+ poly-Si / c-Si junctions on wet-chemically grown interfacial oxides and on different wafer morphologies32nd European PV Solar Energy Conference and Exhibition (32nd EU PVSEC), Munich, Germany, 20.-24.06.2016.
  • Michael Popp, Hauke Huisinga, Lutz Hofmann and Wolfgang Mathis (2016): A MODULAR SIMULATION FRAMEWORK BASED ON CCMAdvanced Aspects of Theoretical Electrical Engineering Sofia ‚2016, 15.09.16 – 16.09.16, Sofia, Bulgaria
  • Michael Popp, Patrick Laza, Wolfgang Mathis (2016): Modeling and simulation aspects of AC machinesArchives of Electrical Engineering, Vol. 65, Issue 2, pp. 315-326 June 2016
    DOI: 10.1515/aee-2016-0023
  • Morisse, M., Bartschat, A., Wenske, J., Mertens, A. (2016): Converter Lifetime Assessment for Doubly-Fed Induction Generators Considering Derating Control Strategies at Low Rotor FrequenciesJournal of Physics: Conference Series, 753 (11)
  • Morisse, M., Bartschat, A., Wenske, J., Mertens, A. (2016): ependency of the lifetime estimation of power modules in fully rated wind turbine converters on the modelling depth of the overall system18th European Conference on Power Electronics and Applications, EPE 2016 ECCE Europe.
  • Morisse, M.; Bartschat, A.; Wenske, J.; Mertens, A. (2016): Converter Lifetime Assessment for Doubly-Fed Induction Generators Considering Derating Control Strategies at Low Rotor FrequenciesThe Science of Making Torque from Wind (TORQUE 2016)
  • Narjes, G.; Müller, J.; Kauth, F.; Seume, J.; Mertens, A.; Ponick, B. (2016): Design Considerations for an Electrical Machine Propelling a Direct Driven Turbo Compressor for Use in Active High-Lift SystemsInternational Conference on Electrical Systems for Aircraft, Railway, Ship propulsion and Road vehicles & International Transportation Electrification Conference, Toulouse, Frankreich, 02.-04. November 2016
  • Nespor, D.; Denkena, B.; Grove, T. & Pape, O.   (2016): Surface topography after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end millingInt. J. Adv. Manuf. Technol. 85 (5-8), S. 1585–1602 
    DOI: 10.1007/s00170-015-7885-5
  • Peibst, R.; Larionova, Y.; Reiter, S.; Turcu, M.; Brendel, R.; Tetzlaff, D.; Krügener, J.; Wietler, T.; Höhne, U.; Kähler, J.-D.; Mehlich, H. & Frigge, S. (2016): Implementation of n+ and p+ poly-Si/c-Si junctions on front and rear side of double-side contacted industrial silicon solar cells32nd European PV Solar Energy Conference and Exhibition (32nd EU PVSEC), Munich, Germany, 20.-24.06.2016.
  • Peibst, R.; Römer, U.; Larionova, Y.; Rienäcker, M.; Merkle, A.; Folchert, N.; Reiter, S.; Turcu, M.; Min, B.; Krügener, J.; Tetzlaff, D.; Bugiel, E.; Wietler, T. & Brendel, R. (2016): Working Principle of Carrier Selective Poly-Si/c-Si Juntions: Is Tunneling the Whole Story?6th International Conference on Silicon Photovoltaics (6th SiliconPV), Chambéry, France, 07.-09.03.2016.
  • Pösch, A.; Schlobohm, J.; Matthias, S. & Reithmeier, E.   (2016): Rigid and flexible endoscopes for three dimensional measurement of inside machine parts using fringe projectionOptics and Lasers in Engineering
    DOI: 10.1016/j.optlaseng.2016.05.023
  • Reiter, S.; Koper, N.; Reineke-Koch, R.; Larionova, Y.; Turcu, M.; Krügener, J.; Tetzlaff, D.; Wietler, T.; Höhne, U.; Kähler, J.-D.; Brendel, R. & Peibst, R. (2016): Parasitic Absorption In Polycrystalline Si-Layers For Carrier-Selective Front Junctions6th International Conference on Silicon Photovoltaics (6th SiliconPV), Chambéry, France, 07.-09.03.2016.
  • Schlobohm, J.; Bruchwald, O.; Frackowiak, W.; Li, Y.; Kästner, M.; Pösch, A.; Reimche, W.; Reithmeier, E. & Maier, H. J. (2016): Turbine blade wear and damage – An overview of advanced characterization techniquesMaterials Testing 58 (5), S. 389–394 
    DOI: 10.3139/120.110872
  • Schlobohm, J.; Pösch, A. & Reithmeier, E.  (2016): A Raspberry Pi Based Portable Endoscopic 3D Measurement SystemElectronics 5 (3), S. 43 
    DOI: 10.3390/electronics5030043
  • Schlobohm, J.; Pösch, A.; Reithmeier, E. & Rosenhahn, B.   (2016): Improving contour based pose estimation for fast 3D measurement of free form objectsMeasurement 92 (92), S. 79–82 
    DOI: 10.1016/j.measurement.2016.05.093
  • Schwack, F. & Poll, G. (2016): Service Life of Blade Bearings – Problems Faced in Service Life Estimation of Blade BearingsWindTech-International November/December 2016 p. 19-22.
  • Schwack, F.; Stammler, M.; Flory, H. & Poll, G. (2016): Free Contact Angles in Pitch Bearings an their Impact on Contact and Stress ConditionsEWEA 2016, 27-29 September, Hamburg, Germany, Accepted Abstract
  • Schwack, F.; Stammler, M.; Flory, H., & Poll, G. (2016): Free Contact Angles in Pitch Bearings and their Impact on Contact and Stress ConditionsEuropeWind 2016
  • Schwack, F.; Stammler, M.; Poll, G. & Reuter, A. (2016): Comparison of Life Calculations for Oscillating Bearings Considering Individual Pitch Control in Wind TurbinesJournal of Physics: Conference Series (Vol. 753, No. 11, p. 112013)
  • Schwack, F.; Stammler, M.; Poll, G. & Reuter, A. (2016): Comparison of Life Calculations for Oscillating Bearings Considering Individual Pitch Control in Wind TurbinesJournal of Physics: Conference Series, (TORQUE 2016, 5-7 October, Karlsruhe, Germany), Accepted Abstract
  • Schwerdt, L.; Hauptmann, T.; Kunin, A.; Wallaschek, J.; Wriggers, P.; Panning-von Scheidt, Lars; Löhnert, S.; Seume, J. R. (2016): Aerodynamical and Strucutral Analysis of Operationally used Turbine Blades5th International Conference on Through-life Engineering Services, 2016, Cranfield, England
  • Stammler, M. & Schwack F. (2016): Neu entwickelte Tests für WindenergiekomponentenVortrag – Verein Deutscher Ingenieure / Arbeitskreis Entwicklung und Konstruktion
  • Stammler, M.; Schwack, F.; Reuter, A. & Poll, G. (2016): Friction Torque of Wind-Turbine Pitch Bearings – Comparison of Experimental Results with available ModelsJournal of Physics: Conference Series, (TORQUE 2016, 5-7 October, Karlsruhe, Germany), Accepted Abstract, 2016
  • Stavroula Tsiapoki, Thomas Krause, Moritz W. Häckell, Raimund Rolfes, Jörn Ostermann (2016): Combining a Vibration-Based SHM-Scheme and an Airborne Sound Approach for Damage Detection on Wind Turbine Rotor Blades8th European Workshop on Structural Health Monitoring, July 2016.
  • Tappe, S.; Dörbaum, M.; Kotlarski, J.; Ortmaier, T. & Ponick, B. (2016): Dynamics of an Electromagnetic Tilting Actuator in a Hyper-Redundant Serial Chain3rd Symposium on Automated Systems and Technologies (AST 2016). Garbsen, Germany
  • Tappe, S.; Dörbaum, M.; Kotlarski, J.; Ponick, B. & Ortmaier, T. (2016): Kinematics and Dynamics Identification of a Hyper-Redundant, Electromagnetically Actuated ManipulatorIEEE International Conference on Advanced Intelligent Mechatronics (AIM 2016). Banff, Canada
  • Tappe, S.; Singer, B.; Kotlarski, J & Ortmaier, T. (2016): Geometric Synthesis of a Hyper-Redundant Manipulator based on an Adaptable Model of the Colon15th Annual Conference of the German Society for Computer and Robotic Assisted Surgery (Curac 2016). Bern
  • Teßmer, J.; Icpinar, C.; Sevinc, A.; Daniele, E.; Riemenschneider, J.; Hölling, M. & Balzani, C. (2016): Schlussbericht Projekt SmartBlades
    DOI: 10.2314/GBV:871472740
  • Tetzlaff, D.; Krügener, J.; Larionova, Y.; Reiter, S.; Turcu, M.; Peibst, R.; Höhne, U.; Kähler, J.-D. & Wietler, T. (2016): Finding Pinholes in Carrier Selective Polycrystalline Si / Crystalline Si Contacts16th European Microscopy Conference, Lyon, France, 28.08.-02.09.2016.
  • Tetzlaff, D.; Krügener,J.; Larionova, Y.; Reiter, S.; Turcu, M.; Peibst, R.; Höhne, U.; Kähler, J.-D. & Wietler, T. (2016): Evolution of Oxide Disruptions: The (W)hole Story About Passivating Contacts43rd Photovoltaic Specialists Conference (43rd IEEE PVSC), Portland, OR, USA, 05.-10.06.2016.
  • Thieken, K., Achmus, M., Terceros, M., Dubois, J., Gerlach, T. (2016): Describing Six-Degree-of-Freedom Response of Foundations Supporting OWEC Jacket Structures26th Int. Ocean and Polar Engineering Conference (ISOPE)
  • von der Haar, C. & Marx, S. (2016): Entwicklung von Steifigkeit und Ultraschallgeschwindigkeit dynamisch beanspruchter BetonprobenBeton- und Stahlbetonbau 111, Heft 3, Seiten 141 - 148.
    DOI: 10.1002/best.201500059
  • von der Haar, C. & Marx, S. (2016): Strain development of plain high strength concrete under fatigue loadingProceedings of the 4th International Symposium on Ultra-High Performance Concrete and High Performance Materials (HiPerMat), Kassel, Germany, 9.-11. März 2016.
  • von der Haar, C. & Marx, S. (2016): Development of stiffness and ultrasonic pulse velocity in fatigue loaded concreteStructural Concrete 17 , Heft 4, Seiten 630-636.
    DOI: DOI: 10.1002/suco.201600007
  • Von der Haar, H.; Hartmann, U.; Hennecke, C.; Dinkelacker, F. & Seume, J. R.  (2016): Early Defect Detection on an annular Swirl-Burner-Array by Optical Measuring Exhaust Gases and Numerical AnalysisProceedings of the ASME Turbo Expo 2016, June 13-17, 2016, Seoul, South Korea
  • Zou, Y.; Li, Y.; Kästner, M.; Reithmeier, E.; Zou, Y. & Kaestner, M.   (2016): Low-coherence interferometry based roughness measurement on turbine blade surfaces using wavelet analysisOptics and Lasers in Engineering 82, S. 113–121 
    DOI: 10.1016/j.optlaseng.2016.02.011
  • Aschenbruck, J. & Seume, J. R.  (2015): Experimentally Verified Study of Regeneration-Induced Forced Response in Axial TurbinesJournal of Turbomachinery 137 (3), S. 1–10 
    DOI: 10.1115/1.4028350
  • Blank, M.; Breithaupt, T.; Bremer, J.; Dammasch, A.; Garske, S.; Klingenberg, T.; Koch, S.; Lünsdorf, O.; Nieße, A.; Scherfke, S.; Sonnenschein, M. & Hofmann, L. (2015): Work Group Scenario DesignHofmann, L. & Sonnenschein, S.: Smart Nord – Final Report, pp. 169-183. Hannover, April 2015.
  • Brendel, R.; Dullweber, T.; Peibst, R.; Kranz, C.; Merkle, A. & Walter, D. (2015): Breakdown of the efficiency gap to 29% based on experimental input data and modelingProgress in Photovoltaics: Research and Applications
    DOI: 10.1002/pip.2696
  • C. Schinke, P. C. Peest, K. Bothe, J. Schmidt, R. Brendel, M. R. Vogt, I. Kroeger, S. Winter, A. Schirmacher, S. Lim, H. T. Nguyen and D. Macdonald (2015): Experimental determination of the uncertainty of the absorption coefficient of crystalline silicon5th international conference on silicon photovoltaics, SiliconPv 2015, edited by G. Hahn , Vol. 77, pp. 170-178
  • Denkena, B.; Boess, V.; Nespor, D.; Floeter, F. & Rust, F. (2015): Engine blade regeneration: a literature review on common technologies in terms of machiningInt J Adv Manuf Technol 81 (5-8), S. 917–924 
    DOI: 10.1007/s00170-015-7256-2
  • Denkena, B.; Böß, V.; Nespor, D.; Gilge, P.; Hohenstein, S. & Seume, J.R. (2015): Prediction of the 3D Surface Topography after Ball End Milling and its Influence on AerodynamicsConference on Modelling of Machining Operations (15th CMMO). Karlsruhe. 11.-12. Juni 2015
    DOI: 10.1016/j.procir.2015.03.049
  • Dörbaum, A. Mertens, A. Merkert, J. Friedrichs, Ç. Atalayer and Seume, J.R. (2015): SFB 880 - Efficient High LiftProceedings of 5th International Workshop on Aircraft System Technologies, 24-25 March 2015, Hamburg, Germany
    ISBN: 978-3-8440-3319-9
  • Dörbaum, M.; Tappe, S.; Kotlarski, J.; Ortmaier, T.; Mertens, A. & Ponick, B. (2015): Simulations- und Messmethoden eines neuartigen elektromagnetischen KippaktorsTagungsband VDE Mechatronik. Dortmund
  • Dörbaum, M.; Tappe, S.; Kotlarski, J.; Ortmaier, T.; Mertens, A.; Ponick, B. (2015): Simulation and Measurement on a Novel Electromagnetic Tilting ActuatorVDI Mechatroniktagung 2015, Dortmund, Germany, 12.-13. März 2015
  • Dörbaum, M.; Weber, S.; Strempel, J.; Winkel, T.; Mertens, A.; Ponick, B. (2015): Comparison of two alternative power supply strategies for an electromagnetic tilting actuator, Innovative Small Drives and Micro-Motor Systems (IKMT)10. ETG/GMM-Fachtagung, Koeln, Germany, 14.-15. September 2015, pp. 71-76
  • Essig, S.; Geisz, J.F.; Steiner, M.A.; Merkle, A.; Peibst, R.; Schmidt, J.; Brendel, R.; Ward, S.; Friedman, D.J.; Stradins, P. & Young, D.L. (2015): Development of highly-efficient GaInP/Si tandem solar cells2015 IEEE 42nd photovoltaic specialist conference
  • Flöter, F. & Denkena, B.  (2015): Analysis of Chatter Vibration and Tool Deflection in Milling with a Novel Active Machine Tool GuideApplied Mechanics and Materials 794, S. 331–338 
    DOI: 10.4028/www.scientific.net/AMM.794.331
  • Hauptmann, T.; Aschenbruck, J.; Christ, P.; Hennecke, C.; Dinkelacker, F. & Seume, J.R. (2015): Influence of Combustion Chamber Defects on the Forced Respone Behavior of Turbine BladesProceedings of the 14th International Symposium on Unsteady Aerodynamics, Aeroacoustics & Aeroelasticity of Turbomachines, ISUAAAT14. Schweden, Stockholm. 8-11 September 2015
  • Hennecke, C.; Hartmann, U.; von der Haar, H.; Dinkelacker, F. & Seume, J.R. (2015): Correlation of Defects in an Annular Swirl-Burner-Array by Optical Measuring Exhaust Gases and Numerical Analysis64. Deutscher Luft- und Raumfahrtkongress 2015. 22-24 September 2015, Rostock
  • Kellenbrink, C. & Helber, S. (2015): Scheduling resource-constrained projects with a flexible project structure KellenbrinkEuropean Journal of Operational Research 246 (2), S. 379–391 
    DOI: 10.1016/j.ejor.2015.05.003
  • Kiefer, F.; Peibst, R.; Ohrdes, T.; Dullweber, T.; Kruegener, J.; Osten, H.J.; Schoellhorn, C.; Grohe, A. & Brendel, R. (2015): Influence of the boron emitter profile on Voc and Js losses in fully ion implanted n-type pert solar cellsPhysica Status Solidi a-Applications and Materials Science 212, 291-297
  • Körner, S.; Kiefer, F.; Peibst, R.; Heinemeyer, F.; Krügener, J. & Eberstein, M. (2015): Basic study on the influence of glass composition and aluminum content on the Ag/Al paste contact formation to boron emittersEnergy Procedia 67 (2015) 20
    DOI: DOI: 10.1016/j.egypro.2015.03.284
  • Krause, L. & Hübler, C. (2015): Development of a Prescribed Wake Model for Simulation of Wind TurbinesEnergy Procedia. Band: 80. Seite(n): 342 – 348
    DOI: 10.1016/j.egypro.2015.11.438
  • Krügener, J.; Peibst, R.; Bugiel, E.; Tetzlaff, D.; Kiefer, F.; Jestremski, M.; Brendel, R. & Osten, H.J. (2015): Ion implantation of boric molecules for silicon solar cellsSolar Energy Materials & Solar Cells 142, 12
    DOI: 10.1016/j.solmat.2015.05.024
  • Krügener, J.; Peibst,R.; Wolf, F.A.; Bugiel, E.; Ohrdes, T.; Kiefer, F.; Schöllhorn, C.; Grohe, A.; Brendel, R. & Osten, H.-J. (2015): Electrical and Structural Analysis of Crystal Defects after High-Temperature Rapid Thermal Annealing of highly Boron Ion-Implanted EmittersIEEE Journal of Photovoltaics 5 (2015) 166
    DOI: 10.1109/JPHOTOV.2014.2365468
  • Li, Y.; Kästner, M. & Reithmeier, E.   (2015): High-precision surface measurement with an automated multiangle low coherence interferometerApplied Optics 54 (6), S. 1232 
    DOI: 10.1364/AO.54.001232
  • Lohaus, L.; Cotardo, D.; Werner, M.; Schaumann, P. & Kelma, S. (2015): Experimental and Numerical Investigations of Grouted Joints in Monopiles Subjected to Early-age CyclingJournal of Ocean and Wind Energy (2), Issue 4, ISOPE, pp. 193-201
    DOI: 10.17736/jowe.2015.jdsr03
    ISBN: 978-1-880653-89-0
  • Mustafa, R.; Küçükay, F.; Boseniuk, F.; Ponick, B.; Tang, T.; Köhler, J.; Ullrich, B. & Mertens, A. (2015): Innovative Electric Vehicle Modelling for Energy Management ApplicationsInternational Journal of Vehicle Design, vol. 68, no. 4, pp. 265-284
  • Nasdala, L.; Kempe, A. & Rolfes, R. (2015): An elastic molecular model for rubber inelasticityComputational Materials Science. Band: 106. Seite(n): 83-99
    DOI: 10.1016/j.commatsci.2015.04.036
  • Nespor, D.; Denkena, B.; Grove, T. & Böß, V. (2015): Differences and similarities between the induced residual stresses after ball end milling and orthogonal cutting of Ti–6Al–4VJournal of Materials Processing Technology 226, S. 15–24 
    DOI: 10.1016/j.jmatprotec.2015.06.033
  • Nicolaus, M.; Möhwald, K., & Maier, H. J.  (2015): Combined brazing and alitising process for thermally sprayed Ni-based alloys for the repair of turbine bladesThermal Spray Bulletin 2015 (8) (2), S. 56–61
  • Nicolaus, M.; Rottwinkel, B.; Möhwald, K.; Nölke, C.; Kaierle, S.; Maier, H. J. & Wesling, V. (2015): Future regeneration processes for high pressure turbine blades64. Deutscher Luft- und Raumfahrtkongress 2015, 22-24 September 2015. Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V. Rostock, 24.09.2015
  • Pohle, L.; Panning-von Scheidt, L. & Wallaschek, J.  (2015): Transient Amplitude Amplification of Mistuned Blisks BonhageJ. Eng. Gas Turbines Power 137 (11), S. 1125-02 
    DOI: 10.1115/1.4030278
  • Reinoso, J.; Paggi, M. & Rolfes, R. (2015): A computational framework for the interplay between delamination and wrinkling in functionally graded thermal barrier coatingsComputational Materials Science
    DOI: 10.1016/j.commatsci.2015.08.031
  • Römer, U.; Peibst, R.; Ohrdes, T.; Lim, B.; Krügener, J.; Wietler, T. & Brendel, R. (2015): Ion Implantation for Poly-Si Passivated Back-Junction Back-Contacted Solar CellsIEEE Journal of Photovoltaics 5 (2015) 507
    DOI: 10.1109/JPHOTOV.2014.2382975
  • Schinke, C.; Peest, P.C.; Schmidt, J.; Brendel, R.; Bothe, K.; Vogt, M.R.; Kroeger, I.; Winter, S.; Schirmacher, A.; Lim, S.; Nguyen, H.T. & MacDonald, D. (2015): Uncertainty analysis for the coefficient of band-to-band absorption of crystalline siliconAIP Advances 5
  • Scholles, F.; Günnewig, D.; Bäumer, C. & Putschky, M. (2015): Berücksichtigung der Naturschutzbelange bei der Korridorsuche für eine Höchstspannungsleitung in der BundesfachplanungUVP-report, Vol. 29, S. 131-139
  • T. Breithaupt, S. Garske, L. Hofmann (2015): Workpackage 4.1 Interconnected SystemL. Hofmann and S. Sonnenschein, Smart Nord – Final Report, pp. 169-183, Hannover, April 2015.
  • Tappe, S.; Dörbaum, M.; Mertens, A.; Ponick, B.; Kotlarski, J. & Ortmaier, T. (2015): The Kinematic Synthesis of a Spatial, Hyper-Redundant System based on Binary Electromagnetic Actuators6th International Conference on Automation, Robotics and Applications (ICARA 2015). Queenstown, New Zealand
  • Tappe, S.; Pohlmann, J.; Kotlarski, J. & Ortmaier, T. (2015): Towards a Follow-the-Leader Control for a Binary Actuated Hyper-Redundant ManipulatorIEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2015). Hamburg, Germany
  • Teichel, S.; Dörbaum, M.; Misir, O.; Merkert, A.; Mertens, A.; Seume, J. & Ponick, B. (2015): Design Considerations for the Components of Electrically Powered Active High-Lift-Systems in Civil AircraftCEAS Aeronautical Journal, Volume 6, Number 1, pp. 49-67
    DOI: 10.1007/s13272-014-0124-1
  • Teichel, S.; Verstraete, T. & Seume, J. (2015): Optimized Multidisciplinary Design of a Small Transonic Compressor for Active High-Lift SystemsProceedings of International Gas Turbine Congress, Tokyo.
  • von der Haar, C.; Hümme, J.; Marx, S. & Lohaus, L. (2015): Untersuchungen zum Ermüdungsverhalten eines höherfesten NormalbetonsBeton- und Stahlbetonbau 110, Heft 10, Seiten 699 - 709.
    DOI: 10.1002/best.201500034
  • von der Haar, C.; Marx, S. & Krompholz, R. (2015): Ultraschalluntersuchungen an statisch beanspruchten BetonprobenBeton- und Stahlbetonbau 110, Heft 11, Seiten 759 - 766.
    DOI: 10.1002/best.201500037
  • Willeke, S.; Meinzer, C.; Panning-von Scheidt, L. & Schönenborn, H. (2015): Mistuning aerodynamisch und strukturmechanisch gekoppelter BeschaufelungenFVV Zwischenbericht, Heft R 573 (Herbsttagung 2015), Würzburg
  • Adamczuk, R.R.; Luehrmann, J. & Seume, J.R. (2014): Methodology for evaluating hot gas path defects in an exhaust jetAerospace Science and Technology 39 (Vol. 39), S. 120–127 
    DOI: 10.1016/j.ast.2014.08.011
  • Appelrath, H.-J.; Wissing, C.; Schnabel, S. & Mayer, C. (2014): Future Energy Markets, acatech Studie
  • Blank, M. & Lehnhoff, S. (2014): Considering Correlations for Reliable Distributed Ancillary Service Provision5th IEEE PES Innovative Smart Grid Technologies (ISGT) Europope. October 12-14, 2014, Istanbul, Turkey
  • Blank, M. & Lehnhoff, S. (2014): Correlations in Reliability Assessment of Agent-based Ancillary-Service Coalitions18th Power Systems Computation Conference (PSCC). August 18-22, 2014, Wroclaw, Poland
  • Blank, M.; Calabria, M.; Dietz, R.; Fuchs, F.; Klingenberg, T.; Lehnhoff*, S.; Mertens, A. & Schumacher, W. (2014): Agentenbasierte Vorhaltung und Erbringung von PrimärregelleistungAutomatisierungstechnik
  • Breithaupt, T.; Rendel, T. & Hofmann, L. (2014): INES – Integrierte Netz- und Energiemarktsimulation15. Dresdener Kreis 2014, Fachtagung der TU-Dresden, der Universität Hannover, der Universität Magdeburg und der Gesamthochschule Duisburg: Elektroenergieversorgung
  • Bremer, J. & Sonnenschein, M. (2014): Constraint-Handling with Support Vector DecodersFilipe, J.; Fred, A.L.N. (Hrgs.) Communications in Computer and Information Science, Springer
  • Calabria, M. & Schumacher, W. (2014): Stability Optimization for Distributed Generation of Load-Following EnergyEnergyCon2014, Dubrovnik
  • Chahine, C.; Seume, J. & Verstraete, T. (2014): The influence of metamodeling techniques on the multidisciplinary design optimization of a radial compressor impellerProceedings of ASME Turbo Expo 2012.
  • Denkena, B.; Gümmer, O. & Flöter, F.  (2014): Evaluation of electromagnetic guides in machine toolsCirp Annals 63, S. 357–360 
    DOI: 10.1016/j.cirp.2014.03.130
  • Denkena, B.; Nespor, D.; Böß, V. & Köhler, J.  (2014): Residual stresses formation after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end millingCIRP Journal of Manufacturing Science and Technology 7 (4), S. 347–360 
    DOI: 10.1016/j.cirpj.2014.07.001
  • Dewenter, T.; Werther, B.; Hartmann, A. K. & Beck, H.-P. (2014): Optimierung des dynamischen Verhaltens netzstützender Anlagen am Beispiel der Virtuellen Synchronmaschine13. Symposium Energieinnovation, Graz
  • Dietz, R.; Fuchs, F.; Breithaupt, T.; Garske, S.; Mertens, A. & Hofmann, L. (2014): Challenges of Grid Integration of Distributed Generation in the Interdisciplinary Research Project Smart NordThe 5th International Symposium on Power Electronics for Distributed Generation Systems, Galway, Ireland (PEDG 2014)
  • Eickemeyer, S. C.; Herde, F.; Irudayaraj, P. & Nyhuis, P.  (2014): Decision models for capacity planning in a regeneration environmentInternational Journal of Production Research 52 (23), S. 7007–7026 
    DOI: 10.1080/00207543.2014.923122
  • Göthel, O. (2014): Forschungsvorhaben HyConCast - Hybride Substruktur aus hochfestem Beton und Sphäroguss für Offshore-Windenergienalgen4. Ingenieurtechnisches Kolloquium des Ingenieurbüros grbv, 18.9.2014, Hannover.
  • Holl, M.; Rogge, T.; Loehnert, S.; Wriggers, P. & Rolfes, R.  (2014): 3D multiscale crack propagation using the XFEM applied to a gas turbine bladeComput Mech 53 (1), S. 173–188
    DOI: 10.1007/s00466-013-0900-5
  • Kuprat, T.; Becker, J.; Mayer, J. & Nyhuis, P. (2014): Evaluating the Logistic Performance Capability of Regeneration ProcessesWorld Academy of Science, Engineering and Technology, International Science Index 89, International Journal of Social, Management, Economics and Business Engineering 2014 (8) (5), S. 252–256
  • Loehnert, S.  (2014): A stabilization technique for the regularization of nearly singular extended finite elementsComput Mech 54 (2), S. 523–533 
    DOI: 10.1007/s00466-014-1003-7
  • Mulleners, K.; Gilge, P. & Hohenstein, S.  (2014): Impact of Surface Roughness on the Turbulent Wake Flow of a Turbine BladeJournal of Aerodynamics 2014, S. 1–9 
    DOI: 10.1155/2014/458757
  • Piech, K.; Bleiker, R.; Lehnhoff, S. & Mayer, C. (2014): Automatisierung heterogener, verteilter Energieanlagen mittels OPC UA. Zukünftige Stromnetze für Erneuerbare EnergienIRED Berlin, Germany
  • Psola, J.-H.; Canders, W.-R. & Henke, M. (2014): Optimization of energy output by combining energy storages with renewable energiesPCIM, Shanghai, Asia
  • Psola, J.-H.; Pandya, K. & Henke, M. (2014): Characteristics of Energy Storage in Smart GridsEVER, Monaco
  • Sonnenschein, M.; Hinrichs, C.; Nieße, A. & Vogel, U. (2014): Supporting Renewable Power Supply by Distributed Coordination of Energy ResourcesHilty, L. M.; Aebischer, B.: ICT Innovations for Sustainability, Springer Advances in Intelligent Systems and Computing
  • Tabar, M. R. R.; Anvari, M.; Lohmann, G.; Heinemann, D.; Wächter, M.; Milan, P.; Lorenz, E. & Peinke, J. (2014): Kolmogorov spectrum of renewable wind and solar power fluctuationsEuropean Physical Journal Special Topics
  • Tabar, M. R. R.; Anvari, M.; Wächter, M.; Milan, P.; Lohmann, G.; Lorenz, E.; Heinemann, D.; Lorenz, E. & Peinke, J. (2014): Renewable Power from Wind and Solar: Their Resilience and Extreme Events
  • Tappe, S.; Kotlarski, J. & Ortmaier, T. (2014): Dexterous Surgical Instrument Based on Electromagnetic Actuation10. Russian-German Conference on Biomedical Engineering. St. Petersburg, Russia
  • Beck, A.; Derksen, C.; Lehnhoff, S.; Linnenberg, T.; Nieße, A. & Rohbogner, G. (2013): Energiesysteme und das Paradigma des AgentenGöhner, P. (Hrsg.): Agentensysteme in der Automatisierungstechnik (Xpert.press), Springer Verlag
  • Blank, M. & Lehnhoff, S. (2013): Assessing Reliability of Distributed Units with Respect to the Provision of Ancillary Services11th IEEE Conference on Industrial Informatics INDIN 2013, Special Session on Industrial Informatics in Smart Grids, Bochum, Germany
  • Blank, M. & Lehnhoff, S. (2013): A Concept for Reliability Assessment for the Provision of Ancillary ServicesSmartGreens2013, Aachen | Datei |
  • Blank, M.; Breithaupt, T.; Dammasch, A.; Garske, S. & Nieße, A. (2013): Evaluationsszenarien für die Teilprojekte 1–4. Technischer Bericht im Rahmen des Projektes Smart Nord
  • Böß, V.; Nespor, D.; Samp, A. & Denkena, B.  (2013): Numerical simulation of process forces during re-contouring of welded parts considering different material propertiesCIRP Journal of Manufacturing Science and Technology 6 (3), S. 167–174 
    DOI: 10.1016/j.cirpj.2013.05.001
  • Breithaupt, T.; Garske, S.; Rendel, T. & Hofmann, L. (2013): Methodological Approach for Integrated Grid and Market Simulation of Coherent Distribution and Transmission SystemsEnviroInfo, Hamburg, Germany | Datei |
  • Bremer, J. & Sonnenschein, M. (2013): Sampling the Search Space of Energy Resources for Self-organized, Agent-based Planning of Active Power ProvisionEnviroInfo. Hamburg, Germany | Datei |
  • Bremer, J. & Sonnenschein, M. (2013): Model-based Integration of Constrained Search Spaces into Distributed Planning of Active Power ProvisionComputer Science and Information Systems, Vol. 10, No. 4, S. 1823-1854
  • Bremer, J. & Sonnenschein, M. (2013): Kommunikation von Umweltkennzahlen im Smart Grid und deren Integration in die verteilte WirkleistungsplanungMarx Gómez, J., Lang, C., Wohlgemuth, V. (Hrsg.): IT-gestütztes Ressourcen- und Energiemanagement. Konferenzband zu den 5. BUIS-Tagen. Oldenburg, Germany. Springer, S. 35-47
  • Bremer, J. & Sonnenschein, M. (2013): Estimating Shapley Values for Fair Profit Distribution in Power Planning Smart Grid CoalitionsKlusch, M., Thimm, M., Paprzycki, M. (Hrgs.) Multiagent System Technologies - Proceedings of the MATES. Koblenz, Germany. Springer, LNCS 8076
  • Bremer, J. & Sonnenschein, M. (2013): Constraint-Handling for Optimization with Support Vector Surrogate Models: A Novel Decoder ApproachICAART13, Barcelona, Spain | Datei |
  • Bremer, J. & Sonnenschein, M. (2013): Automatic Reconstruction of Performance Indicators from Support Vector based Search Space Models in Distributed Real Power Planning ScenariosHorbach, M. (Hrsg.): Lecture Notes in Informatics 220, Proceedings of the Informatik 2013 - Informatik angepasst an Mensch, Organisation und Umwelt. Koblenz, Germany. Bonner Köllen Verlag
  • Calabria, M. & Schumacher, W. (2013): Impact of inverter clustering on the Small-Signal Stability of a GridEnviroInfo, Hamburg, Germany | Datei |
  • Chen, Y.; Werther, B.; Turschner, D.; Wehrmann, E.-A. & Beck, H.-P. (2013): Netzstabilisierung durch die „Virtuelle Synchronmaschine“ (VISMA) mit überlagerter Frequenz- und SpannungsregelungETG-Kongress, Berlin, Germany
  • Dammasch, A. & Engel, B. (2013): Reducing the use of compensation energy in a balancing group using a virtual power plantETG-Kongress, Berlin, Germany
  • Denkena, B. & Flöter, F. (2013): Adaptive Cutting Force Control with a Hybrid Axis SystemInternational Journal of Automation Technology 7 (4), S. 379–384
  • Fuchs, F.; Pham, D.V. & Mertens, A. (2013): Einfluss der Netzimpedanz auf die Dynamik der netzseitigen Stromregelung am Beispiel einer WindenergieanlageETG-Kongress, Berlin, Germany
  • Fuchs, F.; Pham, D.V. & Mertens, A. (2013): Analysis of Grid Current Control in Consideration of Voltage Feedforward and Cable Capacitance Demonstrated on a Fully Sized Wind Turbine Installed in a Wind ParkIEEE Energy Conversion Congress & Expo, Denver, Colorado, USA
  • Hinrichs, C.; Bremer, J. & Sonnenschein, M. (2013): Distributed Hybrid Constraint Handling in Large Scale Virtual Power PlantsIEEE ISGT Europe, Kopenhagen, Denmark | Datei |
  • Holl, M.; Loehnert, S. & Wriggers, P.  (2013): An adaptive multiscale method for crack propagation and crack coalescenceInt. J. Numer. Meth. Engng 93 (1), S. 23–51 
    DOI: 10.1002/nme.4373
  • Kurrat, M.; Hemdan, N.; Engel, B.; Canders, W.-R.; Henke, M. & Schumacher, W. (2013): Technische Herausforderungen für die Lieferung von Systemdienstleistungen durch dezentrale Erzeuger in aktiven VerteilungsnetzenETG-Kongress, Berlin
  • Lehnhoff, S. & Krause, O. (2013): Agentenbasierte VerteilnetzautomatisierungGöhner, P. (Hrsg.): Agentensysteme in der Automatisierungstechnik (Xpert.press), Springer Verlag
  • Lehnhoff, S.; Blank, M.; Klingenberg, T.; Calabria, M. & Schumacher, W. (2013): Distributed Coalitions for Reliable and Stable Provision of Frequency Response Reserve – An Agent-based Approach for Smart Distribution GridsProceedings of the IEEE International Workshop on Intelligent Energy Systems (IWIES) collocated with IECON 2013 - the 39th Annual Conference of the IEEEIndustrial Electronics Society, IEEE Press
  • Lehnhoff, S.; Sonnenschein, M. & Tröschel, M. (2013): Forschungsverbund Smart Nord - Dezentrale und selbstorganisierte Koordinationsverfahren für einen sicheren und zuverlässigen NetzbetriebKonferenz für Nachhaltige Energieversorgung und Integration von Speichern - NEIS 2013 - Tagungsband. S. 7-12
  • Milan, P.; Wächter, M. & Peinke, J. (2013): Turbulent character of wind energyPhysical Review Letters. PRL 110, 138701
  • Nicolaus, M.; Möhwald, K.; Bach, F.-W. & Maier, H. J.  (2013): Heat treatment of thermal sprayed Ni-base-fillermetal-NiCrAlY-coating systems for repairing turbine bladesThermal Spray Bulletin (6) (2), S. 119–123
  • Nieße, A. & Sonnenschein, M. (2013): Using Grid Related Cluster Schedule Resemblance for Energy ReschedulingSmartGreens2013, Aachen, Germany | Datei |
  • Nieße, A.; Tröschel, M. & Sonnenschein, M. (2013): Designing dependable and sustainable Smart Grids - How to apply Algorithm Engineering to distributed control in power systemsEnvironmental Modelling & Software | Datei |
  • Ohsenbrügge, A. & Lehnhoff, S. (2013): Dynamic Strategies for Amount and Reliability of Control Reserve in Future Smart GridsEnviroInfo, Hamburg, Germany | Datei |
  • Palmas, C. & Siewert, A. (2013): Optimizing decentralized renewable energy production by combining potentials and integrated environmental impact analysis - A case study in the Hannover regionEnviroInfo, Hamburg, Germany | Datei |
  • Psola, J.-H.; Canders, W.-R. & Henke, M. (2013): Technologies and Operational Concepts for Energy StoragesEnviroInfo, Hamburg, Germany | Datei |
  • Psola, J.-H.; Canders, W.-R. & Henke, M. (2013): Modeling of a Redox Flow Battery Storage for Grid ApplicationsPCIM, Shanghai, Asia
  • Psola, J.-H.; Canders, W.-R. & Henke, M. (2013): Modeling of a Redox Flow Battery Storage for Grid ApplicationsPCIM, Shanghai, Asia
  • Reimche, W.; Frackowiak, W.; Bruchwald, O.; Böhm, V. & Bach, F.-W.  (2013): Non-Destructive Determination of Local Damage and Material Condition in High-Performance ComponentsHTM - Journal of Heat Treatment and Materials 2 (68), S. 59–67
  • Rosinger, C.; Uslar, M. & Sauer, J. (2013): Threat Scenarios to evaluate Trustworthiness of Multi-agents in the Energy Data ManagementEnviroInfo, Hamburg, Germany | Datei |
  • Seume, J.; Burnazzi, M.; Schwerter, M.; Behr, C.; Rudenko, A.; Schmitz, A.; Dörbaum, M. & Atalayer, C. (2013): SFB 880 – Efficient High Lift62nd DLRK, Stuttgart, Germany, 2013
    ISBN: 978-3-8440-3319-9
  • Sonnenschein, M.; Tröschel, M. & Lünsdorf, O. (2013): Smart Grids for Optimised Utilisation of Renewable Energy SupplyEnviroInfo, Hamburg, Germany | Datei |
  • Unger, D.; Hemdan, N. G. A. & Kurrat, M. (2013): Reactive Power Concepts in the Future Distribution NetworksCIRED, Stockholm, Sweden
  • Unger, D.; Hemdan, N. G. A.; Engel, B. & Kurrat, M.:  (2013): Einsatzstrategien für dezentrale Erzeugungsanlagen zur Blindleistungskompensation oder -bereitstellung aus dem VerteilnetzETG-Kongress, Berlin, Germany
  • Wissing, C. & Appelrath, H.-J. (2013): ReFlex: Market-Based Redispatch in Distribution Grids - Incentivizing Flexible Behavior of Distributed Energy ResourcesEnviroInfo, Hamburg, Germany | Datei |
  • Wissing, C.; Nieße, A. & Tröschel, M. (2013): Market-Based redispatch in distribution GridsIRES
  • Adamczuk, R. & Seume, J. R. (2012): Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet ConditionsInternational Journal of Gas Turbine, Propulsion and Power Systems 4,2, S. 01–07
  • Bremer, J. & Sonnenschein, M. (2012): A Distributed Greedy Algorithm for Constraint-based Scheduling of Energy ResourcesFederated Conference on Computer Science and Information Systems (FedCSIS). Wrocław, Polen | Datei |
  • Chen, Y.; Hesse, R.; Turschner, D. & Beck, H.-P. (2012): Investigation of the Virtual Synchronous Machine in the Island Mode.3rd IEEE PES Innovative Smart Grid Technologies Europe (ISGT Europe). Berlin, Germany
  • Fuchs, F. & Mertens, A. (2012): Dynamic modeling of a 2 MW wind turbine for converter issues : part 1EPE PEMC 2011 ECCE Europe. Proceedings of the 2012-15th International Conference and Expositon on Power Electronics and Motion Control. Novi Sad, Serbien
  • Gandor, M.; Blank, M. & Lehnhoff, S. (2012): Reconfiguration Strategies for Electrical Devices for Operation within Feasibility MarginsVDE Kongress 2012 – Smart Grid Applications / Services. Stuttgart, Germany
  • Haaren, C. v.; Palmas, C.; Boll, T.; Rode, M.; Reich, M.; Albert, C. & Niederstadt, F. (2012): Erneuerbare Energien – Zielkonflikte zwischen Natur- und Umweltschutz31. Deutscher Naturschutztag, Erfurt, Germany
  • Heins, W.; Hingst, J.Z.; Beck, H.-P. & Bohn, C. (2012): Einsatz von Störgrößenbeobachtern für elektrische VerteilnetzeWorkshop des GMA FA 1.40, Theoretische Verfahren der Regelungstechnik, Salzburg, Germany
  • Niedersächsische Technische Hochschule (NTH); Karlsruher Institut für Technologie (KIT); Freie Universität Berlin (FUB); Christian-Albrechts-Universität zu Kiel (CAU) & risicare GmbH (2012): Vorhabenbeschreibung zur Bildung einer Forschungsplattform | Datei |
  • Nieße, A.; Lehnhoff, S. et al.:  (2012): Market-Based Self-Organized Provision of Active Power and Ancillary Services: An Agent-Based Approach for Smart Distribution Grids2012 IEEE Workshop on Complexity in Engineering (IEEE COMPENG 2012). Aachen, Germany
  • Palmas C.; Abis E.; Haaren (von) C. & Lovett A. (2012): Renewables in residential development: an integrated GIS-based multicriteria approach for decentralized micro-renewable energy production in new settlement development: a case study of the eastern metropolitan area of Cagliari, Sardinia, ItalyEnergy, Sustainability and Society | Datei |
  • Rosinger, C.; Uslar, M. & Hockmann, F. (2012): Reputationssysteme für selbstorganisierte Multi-Agenten-Systeme in EnergiemanagementsystemenVDEKongress 2012 – Smart Grid Applications / Services. Stuttgart, Germany
  • Sonnenschein, M.; Appelrath, H.-J. et al. (2012): Dezentrale und selbstorganisierte Koordination in Smart GridsVDE Kongress 2012 – Smart Grid Applications / Services. Stuttgart, Germany
  • Wissing, C. & Appelrath, H.-J. (2012): Using automated market analysis for optimized economic operation of DER in Virtual Power PlantsEEM
  • Caro, J. (2010): Basic Aspects of membrane ReactorsIn: Drioli, E. & Giorno, L.: Comprehensive Membrane Science and Engineering, Vol. 3, pp 1-24, Oxford, Academic press
  • Eickemeyer, S. C.; Borcherding, T.; Schäfer, S. & Nyhuis, P.  (2010): Validation of data fusion as a method for forecasting the regeneration workload for complex capital goodsProd. Eng. Res. Devel. 7 (2-3), S. 131–139 
    DOI: 10.1007/s11740-013-0444-8
  • Caro, J. (2009): Energetische und stoffliche Nutzung von ErdgasUni Magazin der Leibniz Universität Hannover, Sonderheft Energie 01/02
  • Dittmeyer, R. & Caro, J. (2008): Catalytic Membrane Reactorsin Ertl, G.; Knözinger, H.; Schüth, F. & Weitkamp, J. (eds.). Handbook of Heterogeneous Catalysis. Second edition, volume 4, chapter 10.7, Wiley-VCH
  • Jiang, H.; Wang, H. H.; Werth, S.; Schiestel, T. & Caro, J. (2008): Simultaneous production of hydrogen and synthesis gas by combining water splitting with partial oxidation of methane in a hollow-fiber membrane reactorAngewandte Chemie 120, 9481